Drum Rollers, 800 lb Capacity

Rotate a closed plastic, steel or fibre drum with a thorough corner-over-corner mixing action with Tilt-to-Load Drum Tumblers. These drum tumblers have an 800-pound capacity for a full drum and a 400-pound capacity for a half-full drum. For 60Hz or air models you can rotate your drum 5 to 10 RPM and for 50Hz models 4 to 60 RPM.

Description

Tilt-to-Load Drum Tumblers can tumble a plastic steel or fibre drum 29” to 37” tall and 18” to 23. 5” in diameter. Drum tumblers use a separate drum for each batch and result in no container to purge between batches. This eliminates spills, risks of contamination and the splashing of dangerous contents on workers.

A Control Package is sold separately and can be selected with the model and power supply in mind. The power controls start the drum rolling and the control mast can be positioned outside the safety enclosure.

Enclosures with safety interlock by Morse are sold separately and comply with all OSHA requirements. They have a safety interlock to automatically shut off the drum roller when the gate is opened. To allow for operation: open the enclosure gate, place your drum into the drum roller and then close the gate.

Additional information

Designed For

Moving Drums Weighing up to 800 lbs.

Weight Capacity

800 lbs

Number of Users

1

Certifications

OSHA

Gripping Mechanism

Clamp

Unit Base W x L

39" x 59-1/2"

Motor Models

1-Phase Electric Motor, 3-Phase Electric Motor, an Explosion Proof 1-Phase Electric Motor, an Explosion Proof 3-Phase Electric Motor and an Air Motor