Gargoyle Ladder Series
The Gargoyle Ladder Series is a modular system that enables workers to move from one level to another with guardrails on the upper elevation to help prevent a fall to the lower level. Upgrade your system to safely scale parapet walls and other changes of elevation on your rooftop with this fall protection system. Our Gargoyle Ladder Series and Fixed Access Ladders are an upgrade to your facility that improves the accessibility of your rooftop for workers to support maintenance and increase productivity.
These rooftop safety systems come engineered on a single pallet; elements of the system are pre-assembled with simple to follow instructions and a singular tool for installation. This freestanding, portable, modular system is constructed with corrosion resistant lightweight aluminum tubing and utilizes counterweighted baseplates. With no rooftop penetration, your roof will remain intact and you will not have to worry about any unexpected leaks.
What To Expect From OSHA
- When there is a break in elevation of 19 inches (48 cm) or more and no ramp, runway, embankment or personnel hoist is available, employers must provide a stairway or ladder at all worker points of access.
- When there is only one point of access between levels, employers must keep it clear of obstacles to permit free passage by workers. If free passage becomes restricted, employers must provide a second point of access and ensure that workers use it.
- When there are more than two points of access between levels, employers must ensure that at least one point of access remains clear.
- In addition, employers must install all stairway and ladder fall protection systems required by these rules and ensure that their worksite meets all requirements of the stairway and ladder rules before employees use stairways or ladders. See 29 CFR 1926.1050-1060 for the details of the standard.
| Part Number | Set Up | Weight | Dimensions | |
|---|---|---|---|---|
| Ladder 3-1 | Up 3-feet/36″ Platform, down 1′ to roof with 6-foot guide rails | 460 lbs | 9′-4″ x 15″ x 18″ & 4″ x 18″ x 38″ | Request a Quote |
| Ladder 3-2 | Up 3-feet/36″ Platform, down 2′ to roof with 6-foot guide rails | 465 lbs | 9′-4″ x 15″ x 18″ & 4″ x 18″ x 38″ | Request a Quote |
| Ladder 4-1 | Up 4-feet/36″ Platform, down 1′ to roof with 6-foot guide rails | 460 lbs | 9′-4″ x 15″ x 18″ & 4″ x 18″ x 38″ | Request a Quote |
| Ladder 4-2 | Up 4-feet/36″ Platform, down 2′ to roof with 6-foot guide rails | 465 lbs | 9′-4″ x 15″ x 18″ & 4″ x 18″ x 38″ | Request a Quote |
| Ladder 4-3 | Up 4-feet/36″ Platform, down 3′ to roof with 6-foot guide rails | 470 lbs | 9′-4″ x 15″ x 18″ & 4″ x 18″ x 38″ | Request a Quote |
| Ladder 5-1 | Up 5-feet/36″ Platform, down 1′ to roof with 6-foot guide rails | 470 lbs | 9′-4″ x 15″ x 18″ & 4″ x 18″ x 38″ | Request a Quote |
| Ladder 5-2 | Up 5-feet/36″ Platform, down 2′ to roof with 6-foot guide rails | 475 lbs | 9′-4″ x 15″ x 18″ & 4″ x 18″ x 38″ | Request a Quote |
| Ladder 5-3 | Up 5-feet/36″ Platform, down 3′ to roof with 6-foot guide rails | 480 lbs | 9′-4″ x 15″ x 18″ & 4″ x 18″ x 38″ | Request a Quote |
All products are customizable depending on rooftop layout
and applications and include:
- Grated slip resistant walkways
- Complete installation manual and layout drawings
- Counter weighted baseplates
- Rubber mats to protect rooftop membrane
- Vertical posts
- Horizontal rails
- Set Screws
- All parts and materials are supplied in a single pallet
- Customizable product
- Self-weighted bases are portable and allow simple, non-penetrating installation to the rooftop
- Requires NO penetration of the roof membrane, eliminating the risk of weather damage
- Eliminates the need for recurring maintenance and oversight
- “Passive” fall protection system
- Modular system is fully customizable
Custom options:
- Engineered ladders on the face and back of the parapet wall
- Platform over the parapet area to protect sensitive roof membrane from damage
- Fall protection guardrails with kits where falls from one elevation to another may occur
This system is designed to meet or exceed all major governing bodies fall protection requirements including:
United States – Construction Activities Legislation
OSHA 1926 Subpart M: Fall Protection – 1926.501(b)(2)(ii)
OSHA 1926 Subpart M: Fall Protection – 1926.501(b)(4)(i)
United States – Industrial Activities Legislation
OSHA 1910 Subpart D – Walking-Working Surfaces – 1910.28(b)(1)(i)
OSHA 1910 Subpart D – Walking-Working Surfaces – 1910.28(b)(7)
See a full listing of our Gargoyle Rooftop Guardrail product line.
A guide to understanding fall protection regulations and why you need Gargoyle Guardrail.
Request a Quote
Gargoyle Line Of Products
An investment in fall protection
Cost-effective working at heights safety solutions
Safe and reliable engineered fall protection solution
Meets or exceeds all OSHA and ANSI safety standards and regulations
Protects employees from injury or death from potential accidents working at heights
Reduces the potential for costly fines and high insurance premiums
All individual components are under 40 lbs
Reduces PPE and training requirements of staff and contractors
Simple and quick installations that require only one tool
ON THE LEADING EDGE OF SAFETY
Passive Vs Active Fall Protection
Passive Fall Protection
Active Fall Protection
Related Products
Gargoyle Crossover Series
The Gargoyle Crossover Series helps workers move up and over obstructions on the rooftop and have 45-degree bracing on both sides for stability.
Gargoyle Skylight Guardrail
Our Gargoyle Skylight Guardrail System was specifically designed to address fall protection risks and regulations.
Gargoyle Hatch Guardrail
Gargoyle Hatch Guardrail allows for our guardrail system to be integrated with virtually any rooftop opening.
