img logo gargoyle circle r1

Gargoyle Rooftop Guardrail | Agile Series

The Gargoyle Rooftop Guardrail, Agile Series is a unique, easy to install rooftop guardrail system. This rooftop fall protection system is designed with pre-fabricated rail sections which can be installed and dismantled quickly for temporary applications, without sacrificing quality, durability and most importantly safety.

This unique system gives you the ability to design your own rooftop guardrail solution, allowing you to determine how much linear coverage you need, from 8 feet to over a 100 feet.

Note: This system is sold by the rail length.

What To Expect From OSHA

OSHA 1910.29(b) contains system requirements that employers must follow to ensure guardrail systems will protect workers from falling to lower levels.

1910.29(b)(1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking working surface. The top edge height may exceed 45 inches (114 cm), provided the guardrail system meets all other criteria of paragraph (b) of this section.

Injury incident

Accident Report Detail:

On January 9, 2020, Employee #1, employed by a construction company, was working at an existing two-story commercial building. He was killed in a fall.

Learn More

img triangle white

Request a Quote

Gargoyle Line Of Products

An investment in fall protection

Cost-effective working at heights safety solutions

Safe and reliable engineered fall protection solution

Meets or exceeds all OSHA and ANSI safety standards and regulations

Protects employees from injury or death from potential accidents working at heights

Reduces the potential for costly fines and high insurance premiums

All individual components are under 40 lbs

Reduces PPE and training requirements of staff and contractors

Simple and quick installations that require only one tool

ON THE LEADING EDGE OF SAFETY

Passive Vs Active Fall Protection

Passive Fall Protection
A “passive” fall protection system refers to a system that is non-dynamic, stationary, and does not move or adapt or change when in or out of use. They do not require the use of Personal Protective Equipment or active participation from the worker. Typical passive solutions include Guardrails or Netting Systems. This is the preferred choice for its ease of use without the need for additional training and PPE.
Active Fall Protection
An “active” Fall Protection System requires the use of special equipment and participation by the worker. There are two types of Active Fall Protection Systems, fall restraint and fall arrest systems. These systems share the common feature of securing the worker wearing a full-body harness to an anchorage point with some type of connecting system, depending on the application. Active Fall Protection Systems include Fall Arrest Anchors, Roof Anchors, and Safety Harness’.
img base plate value prop r1
logo gargoyle vertical

About Factory Supply

Learn more about our team and what sets us apart as industry experts in fall protection, ground support and material handling industries.

Fall Protection Guide

Check to see what the OSHA regulations for working at heights and fall protection are and which Gargoyle Rooftop Guardrail systems help you comply.

Customer Service

Our team is committed to providing the highest level of customer service. If you didn’t find the information you were looking for, please contact us.

Request a quote

We offer a huge selection of products and quick quotes for what you’re looking for

Have questions?

Give us a call. Our friendly customer service staff are on hand to help you.