Rooftop Guardrail, 27′ Long

This passive fall protection kit offers 27ft of leading edge protection with two 6ft sections for weighted ballast. The hinged, variable fitting in the centre of the 27ft section allows for complete versatility when setting the system up. It can be straight, at 90 degrees, or anything in between, depending on your requirements.

Our largest RoofGuard Classic Kit and it is designed to allow for the maximum amount of both linear coverage and flexibility, ensuring that your employees/contractors are protected around a wide variety of different potentially dangerous situations on your rooftop.


These systems come engineered in a single crate; most parts are pre-assembled with easy to follow instructions and a single tool for installation. This free-standing, portable, modular system is constructed with corrosion resistant lightweight aluminum tubing and utilizes counter weighted baseplates. With no rooftop penetration, your roof will remain intact, so you will not have to worry about any unexpected leaks occurring from using this system.


Additional information

Part Number



42” From Ground to Top of Top-Rail

Shipping Info (DIMS)

405 lbs


This System Is Designed In Order To Meet Or Exceed All Major Governing Bodies Fall Protection Requirements Including: ANSI, OSHA, OHSA And MOL, These Include OSHA Standard 29 CFR 1926.501, 29 CFR 1926.502, Canadian National Building Code,,, Ontario Building Code Section,,, HSG-33 Health & Safety In Roof Work, BS 6399: Part 2 1995 Wind Code, EU Directives & CDM Regulations, BGV A1: 2000, Health, Safety & Welfare Regulation 13 “Falls Or Falling Objects” 1992



What Comes in the Kit

Single Tool Supplied for Assembly Complete Installation Manual and Layout Drawings 9 Counter Weighted Baseplates 5 Rubber Mats to Protect The Rooftop Membrane 5 Pre-Assembled Vertical Posts 8 Horizontal Rails Set Screws Variable Fittings Between Sections, Allowing For Flexibility During Installation All Parts And Materials Are Supplied In A Single Crate




Setup in Straight Line: Width of Rails 27’ 8”, Width With Baseplates 27’10”, Length From Edge To Back Of Baseplates 7’8”

Diameter of Rail

1.9” OD Aluminum Pipe

Unit Weight

600 lbs


Self-Weighted Bases Are Portable and Allow Simple, Non-Penetrating Installation to The Rooftop