Rooftop Guardrail, 18′ Long

This rooftop guardrail system offers 18ft of leading edge protection with two 6ft sections for weighted ballast. The hinged, variable fitting in the centre of the 18ft section allows for complete versatility when setting the systems up. It can be straight, at 90 degrees, or anything in between, depending on the requirements.

The best way to ensure the safety of your workers is to plan ahead and implement a fall prevention solution within the areas of your rooftop that require access.


This free-standing guardrail system comes pre-engineered in a singular crate; most parts are pre-assembled with easy to follow instructions and a singular tool for installation. Our free-standing, portable, modular systems are constructed with corrosion resistant lightweight aluminum tubing and utilize counter-weighted baseplates, so no roof penetration is required meaning that your roof remains intact.

Our unique, low-profile, stackable baseplates are designed to weigh only 40 lbs and are designed with a carry handle allowing for an easy, ergonomically friendly installation.

RGC-KIT-09 9' Long Guardrail System 9'-4" x 11" x 18" 450 lbs
HG-KIT-18V 18' Long Guardrail System 9'-4" x 15" x 18" 525 lbs
RGC-KIT-27V 27' Long Guardrail System 9'-4" x 15" x 18" 600 lbs
RGX-08-Y/RGE-06-G Custom Length Custom Custom
Custom Rooftop Guardrail Custom Length Custom Custom


Additional information

Part Number



42” From Ground to Top of Top-Rail


This System Is Designed In Order To Meet Or Exceed All Major Governing Bodies Fall Protection Requirements Including: ANSI, OSHA, OHSA And MOL, These Include OSHA Standard 29 CFR 1926.501, 29 CFR 1926.502, Canadian National Building Code,,, Ontario Building Code Section,,, HSG-33 Health & Safety In Roof Work, BS 6399: Part 2 1995 Wind Code, EU Directives & CDM Regulations, BGV A1: 2000, Health, Safety & Welfare Regulation 13 “Falls Or Falling Objects” 1992



What Comes in the Kit

Single Tool Supplied for Assembly Complete Installation Manual and Layout Drawings 9 Counter Weighted Baseplates 5 Rubber Mats in Order To Protect The Rooftop Membrane 5 Pre-Assembled Vertical Posts 8 Horizontal Rails Set Screws Variable Fittings Between Sections, Allowing For Flexibility During Installation All Parts And Materials Are Supplied In A Single Crate




Setup in Straight Line: Width of Rails 18’6”, Width with Baseplates 18’8”, Length Form Edge to Back of Baseplates 7’8”

Diameter of Rail

1.9” OD Aluminum Pipe


9'-4" x 15" x 18"


Self-Weighted Bases Are Portable and Allow Simple, Non-Penetrating Installation to The Rooftop

Unit Weight

525 lbs