Crossover Ladder, RoofStep 5-5 XS

Safely walk over parapet walls and other changes of elevation on your rooftop with this fall protection system. Designed specifically in order to allow for the safe movement of workers on your rooftop; the RoofStep Crossover Series (XS), is designed in order to enable your workers to be able to move up and over obstruction on similar roof levels, and have 45-degree bracing on both sides of the system in order to allow for stability.

This crossover bridge is designed to go up 5 feet and down 5 feet and has a diagonal bracing on the upper and lower sides for stability and includes a 36” long platform which is connected between the top two rungs.

Description

These rooftop safety systems come engineered in a crate; most parts are pre-assembled with simple to follow instructions and a singular tool for installation. This free-standing, portable, modular system is constructed with corrosion resistant lightweight aluminum tubing and utilizes counter weighted baseplates. With no rooftop penetration, your roof will remain intact, so you will not have to worry about any unexpected leaks occurring from using this system.

Our unique, low-profile, stackable baseplates are designed to weigh only 40 lbs and are designed with a carry handle allowing for an easy, ergonomically friendly installation.

Rooftop Safety Has Never Been Easier

Do you have staff and contractors that work atop your roof?
What safety measures do you have in place to protect them from the risk of falling?
On any given day, every rooftop worker is at risk of having a fall and therefore needs the best protection possible.

That is where RoofGuard comes into play.

Factory Supply is your go-to American supplier of RoofGuard, which is a versatile, economical and modular guardrail system designed to protect employees and contractors that perform rooftop job functions. Not requiring any penetration of the roof membrane during installation eliminates the risk of leaks. And as a passive solution, RoofGuard is the preferred method of fall protection as training your staff is not required. Factory Supply’s RoofGuard products exceed all OSHA safety regulations, protecting your business from unnecessary liability or fines.

AVAILABLE PARAPET LADDER MODELS
PART NUMBER SET UP WEIGHT CRATE DIMENSIONS
RoofStep 3-3 XS Up 3-feet/36" top-mid rails/down 3'. With diagongal bracing upper and lower for stability. Includes 36" long platform connected between the two top rungs. 400 + Crate 9'-4" x 15" x 18" &
4" x 18" x 38"
RoofStep 4-4 XS Up 4-feet/36" top-mid rails/down 4'. With diagongal bracing upper and lower for stability. Includes 36" long platform connected between the two top rungs. 410 + Crate 9'-4" x 15" x 18" &
4" x 18" x 38"
RoofStep 5-4 XS Up 5-feet/36" top-mid rails/down 4'. With diagongal bracing upper and lower for stability. Includes 36" long platform connected between the two top rungs. 415 + Crate 9'-4" x 15" x 18" &
4" x 18" x 38"
RoofStep 5-5 XS Up 5-feet/36" top-mid rails/down 5'. With diagongal bracing upper and lower for stability. Includes 36" long platform connected between the two top rungs. 420 + Crate 9'-4" x 15" x 18" &
4" x 18" x 38"

RESOURCES

Additional information

Part Number

RoofStep 5-5 XS

Height

8’6”” From Ground to Top of Top-Rail

Certifications

This System Is Designed to Meet or Exceed All Major Governing Bodies Fall Protection Requirements Including: ANSI, OSHA, OHSA And MOL These Include BGV A1: 2000, EU Directives & CDM Regulations, Health, Safety & Welfare Regulation 13 “Falls Or Falling Objects” 1992

Customizable

Yes

What Comes in the Kit

Complete Installation Manual and Layout Drawings Pre-Assembled Vertical Rails Horizontal Rails Parapet Platform Baseplates Ladder Rungs

Length

9’ Wide x 10’ 8” (Depending on Setup)

Diameter of Rail

1.9” OD Aluminum Pipe

Unit Weight

420 – 460 Lbs Depending on The System

Baseplates

Self-Weighted Bases Are Portable and Allow Simple, Non-Penetrating Installation to The Rooftop

Shipping Info

Two Crates: 9'-4" x 15" x 18" & 4" x 18" x 38"