Traditional Plus Series Steel Lockers
$180.00 – $331.00
Lead Time : 14 Days Material : Steel Finish : Powder Coat
Color samples are avaible upon request. If you have questions, please contact us at +1 (888) 242-3045.
All options below must be selected to get a shipping quote.
With the same standard features as the Traditional line, the Traditional Plus Collection is intended for more rugged applications. Available in single-, double- or triple-tier configurations, this collection features 14 gauge doors with 16 gauge full-height reinforcement channels, frame-secured 11 gauge frame hooks with protruding padlock hasps, and a maintenance-free, single-point latching system. 2 mil powder coated in any of 15 designer colors. Stainless steel recessed handle for safety16 gauge bottom shelf for durabilityContinuous full-length staked piano hinge for securitySingle-point latch is maintenance free with a built-in anti-pry featureRubber door silencers for quiet operation 14 gauge doors,16 gauge frames and bottom, with recessed handles, full length piano hinges, door stiffeners and legs.
Continuous Slope Hood
18 gauge continuous Slope Hoods add a finishing touch to lockers installed along walls and on island groups. The rise is equivalent to one-third the depth of the locker. Custom applications include sloping hood splices, valley corners, and hip ends… all with concealed fasteners.
Individual Slop Top /
Individual Slope Tops are available to help eliminate clutter and add a clean, finished look to the lockers. 16 gauge exposed row ends add to finished look.
18 gauge Recess Trim, with a 3″ face and a 3/8″ top return, provides a neat, framed appearance for recessed lockers. Integral corner caps and hairline joints are reinforced with welded-on splice fingers for this application.
14 gauge Zee Bases provide an overhang with toe space, raising lockers 4″ off the floor. This economical and practical accessory also enhances appearance.
Front Base / Closed End Base
These 18 gauge bases add a finished look, by fitting flush between locker legs; ie. Front Bases fit between front legs and End Bases between front and rear legs of lockers at the end of a row.
Vertical Fillers enhance the appearance of an installation by covering any objects between lockers, and/or filling the gap between lockers and the wall. Fillers are available in two widths, designed for use together with Wall Angle Slip Joints for a tight fit and smooth finish.
Weight N/A Dimensions N/A Tier Starter / Adder Width (Inches) Depth (Inches) Height (Inches) Manufacture Part Number
21121266A, 21121266.00, 21121278A, 21121278.00, 21121566A, 21121566.00, 21121578A, 21121578.00, 21121866.00, 21121866A, 21121878A, 21121878.00, 21151566A, 21151566.00, 21151578A, 21151578.00, 21151866A, 21151866.00, 21151878A, 21151878.00, 21181866A, 21181866.00, 21181878A, 21181878.00, 22121266A, 22121266.00, 22121278A, 22121278.00, 22121566A, 22121566.00, 22121578A, 22121578.00, 22121866A, 22121866.00, 22121878A, 22121878.00, 22151566A, 22151566.00, 22151578A, 22151578.00, 22151866A, 22151866.00, 22151878A, 22151878.00, 22181866A, 22181866.00, 22181878A, 22181878.00, 23121266A, 23121266.00, 23121278A, 23121278.00, 23121566.00, 23121566A, 23121578A, 23121578.00, 23121866A, 23121866.00, 23121878A, 23121878.00, 23151566A, 23151566.00, 23151578A, 23151578.00, 23151866A, 23151866.00, 23151878A, 23151878.00
Only logged in customers who have purchased this product may leave a review.